Get hydrogen power
from your own system design using a: BOYCE ELECTROLYZER TANK
Hydrogen POWER NOW for: Automobiles and Trucks
Boats and Marine Equipment
Electric Generators
Air Conditioning
Kitchen Ranges
Barbecue Grills
Lawn & Garden
Producing and
storing large amounts of hydrogen until use is risky. This tank
conforms to the Boyce Electrolyzer design so you can integrate it as part of
your own hydrogen power system design. See more info on the
Free Energy
Info website, especially in Chapter 10 (Automotive Systems):
*
Chapter 10 as Acrobat PDF
*
Chapter 10 as HTML webpage
Check page 64
through page 134 of Chapter 10 for more details on the updated Boyce
implementation pictured here.
This recently
updated
Boyce Electrolyzer tank supports 101 metal plates which you
must find and provide on your own. The 5 spacer
plates in the photos on this webpage are included, but the 101
electrolysis metal plates are not included. With a completed system of
the Boyce or your
own experimental design, you can generate clean, environmentally friendly hydrogen
"on demand", at the same rate you need it.
The design has been updated recently, so you should read the July 2008
Revision Notes in Microsoft
Word or Acrobat PDF.
SEPTEMBER 2008 UPDATE:
This edition of the tank includes a newer, much better tongue-and-grove
joint for the box!
You can use the newly designed water feed manifold and gas manifold
lengthwise. The electronics penetrators can be installed in any
location, depending on your application requirements.
The October 2008 version of the tank package is $1700.oo, with shipping & handlingextra.
Florida residents pay an additional 7% tax.
PRIOR CUSTOMERS: Tongue-and-groove retrofits for the prior generation boxes are
available, but it requires complete replacement of the old UHMW glued inner
box with a new insert. See the Price List in MS-Word or Acrobat PDF for details. Customers will have to drill
their own access holes but instructions and/or fixtures will be included to
make this upgrade easier.
Here is a video clip from the 2008 "Booster Rally" showing Bob Boyce
explaining his Toyota Prius retrofit with one of these electrolyzer tanks:
Contact Holdgate Enterprises
to discuss your application, possible custom modifications to suit, and large quantity discounts.
Write Holdgate Enterprises
to discuss sketches or prints for building your own custom box (not
recommended.
TANK WITHOUT PLATES (Shows September
2008 Version
without the included tank top)
(Shows discontinued
March 2008 Version
without the included top)
(Shows discontinued March 2008 Version
without the included top)
All
the parts can be removed
for easy replacement
(Shows March 2008 Version, without
the included
top)
Gas
pickup tube port routes gas
to the bubbler(s) (not included)
and then on to
the engine. Two
bubblers are recommended.
Over 100
separate parts are
packaged into the tank
Very efficient hydrogen
generation
Use units in parallel to
match hydrogen generation with need
Electrolyzer metal plates
(101) are not included
Even flow water feed
manifold
Double o-ring electronics
penetrators for connections
Shipped in just 2 weeks ARO
ORDERING
INFORMATION:
All risk and liability is assumed by the
buyer of the kit,
and/or the person performing the installation of the
unit. Holdgate Enterprises shall not be responsible
for any damages, faults, errors, claims, or omissions.
Reasonable care has been employed in the
design and
construction of all items and information provided.
However, due to conditions beyond our control, failure
of the same is always possible due to unforeseen situations
and events. HOLDGATE ENTERPRISES, INC. SHALL NOT
BE HELD RESPONSIBLE FOR ANY DEFECTS IN THE
MATERIALS, CONSTRUCTION OR DESIGN OF ANY
AND ALL ITEMS PURCHASED OR OBTAINED FROM US.
ALL USE IS AT YOUR OWN RISK.
DISCLAIMER:
DUE TO THE UNCONTROLLABLE NATURE OF THIS DEVICE, ALL RESPONSIBILITY FOR
ITS SAFE OPERATION IS YOUR RESPONSIBILITY.
For whatever purpose you
elect to use the box, items, information and/or documents, you do so wholly
on your own and no other person and/or company, including but not limited to
Holdgate Enterprises Inc, is in any way liable for any loss or damage, any
bodily injury or death to you or to others, whether direct or indirect,
resulting from your or anyone’s actions and/or use of items obtained from
us.
Reasonable care has been employed in the design and construction of all
items and information provided; however due to conditions beyond our
control, failure of the same is always possible due to unforeseen situations
and events. WE WILL NOT BE HELD RESPONSIBLE FOR ANY DEFECTS IN THE
MATERIALS, CONSTRUCTION OR DESIGN OF ANY AND ALL ITEMS PURCHASED OR OBTAINED
FROM US. ALL USE IS AT YOUR OWN RISK.
Company Profile
Holdgate Enterprises promotes customer satisfaction by
providing
custom, cost efficient solutions for common problems.
Customer
focus insures a quality product customized to your specifications.
LIABILITY DISCLAIMER:
Any and all liability shall be limited to repair or replacement of a tank kit
(less shipping) for up to 1 year. Kits documented to be defective in
materials or workmanship (as judged solely by Holdgate Enterprises, Inc.)
will be repaired or replaced for up to 1 year. In case of such claim,
write to
eholdgate@tampabay.rr.com with your concerns first, and ONLY return tank
kit(s) when you have obtained from us a RETURN MATERIAL AUTHORIZATION (RMA)
NUMBER.
Under no circumstances are tank kit removal or installation charges included in
any prices quoted on this website or under RMA.
All risk and liability is assumed
by the buyer of the kit, and/or the person performing the installation of the
unit. Holdgate Enterprises shall not be responsible for any damages,
faults, errors, claims, or omissions.
DUE TO THE UNCONTROLLABLE
NATURE OF THIS DEVICE,
ALL RESPONSIBILITY FOR ITS SAFE OPERATION IS YOUR RESPONSIBILITY.
For whatever purpose you elect to
use the tank / box, items, information and/or documents, you do so wholly on
your own and no other person and/or company, including but not limited to
Holdgate Enterprises Inc, is in any way liable for any loss or damage, any
bodily injury or death to you or to others, whether direct or indirect,
resulting from your or anyone’s actions and/or use of items obtained from us.
Reasonable care has been employed in the
design and construction of all items and information provided. However,
due to conditions beyond our control, failure of the same is always possible due
to unforeseen situations and events. HOLDGATE ENTERPRISES, INC. SHALL NOT
BE HELD RESPONSIBLE FOR ANY DEFECTS IN THE MATERIALS, CONSTRUCTION OR DESIGN OF
ANY AND ALL ITEMS PURCHASED OR OBTAINED FROM US. ALL USE IS AT YOUR OWN
RISK.
