H20 / Hydrogen Energy

Holdgate  Enterprises has teamed up with Bob Boyce and other clean energy / green energy experts to create a hydrogen electrolysis tank, also known as the Bob Boyce Electrolyzer.

 

Our tank handles the design, including the pressure and thermal effects, without leaking and we feature unmatched innovative gasket systems.  

 

The best feature of our tanks is the precision plate positioning and ultra-tight machining tolerances which ensures minimal electrical leakage and maximum hydrogen production.

Producing and storing large amounts of hydrogen until use is risky.   This design allows on-the-fly as-you-need-it hydrogen production in relatively small, and therefore relatively safer, amounts (compared to large high-pressure tanks.)


Shows Sept 2008 Version without included tank top


 

This tank conforms to the Boyce Electrolyzer design so you can integrate it as part of your own custom hydrogen power system design.  See more info on the Free Energy Info website, especially in Chapter 10 (Automotive Systems):
   * 
Chapter 10 as Acrobat PDF
   * Chapter 10 as HTML webpage
Check 
pages 33
and 34 first and then browse all of Chapter 10 for a comprehensive insight on the updated Boyce implementation pictured here.

This recently updated Boyce Electrolyzer tank supports 101 metal plates which you must find and provide on your own (e.g. this supplier, your local machine shop, or make-your-own.)   The 5 spacer plates in the photos on this webpage are included, but the 101 electrolysis metal plates are not included.   With a completed system of the Boyce -- or your own -- experimental design, you can generate clean, environmentally friendly hydrogen "on demand" at the same rate you need it. 


Shows Sept 2008 Version without included tank top

Therefore, this new design is called the Bob Boyce 101 Plate Electrolyzer Tank.   You should read the June  2009 Revision Notes  in  Microsoft Word  or  Acrobat PDF.   This edition of the tank includes a newer, much better tongue-and-grove joint for the box! 

You can use the newly designed water feed manifold and gas manifold lengthwise.  The electronics penetrators can be installed in any location, depending on your application requirements.

Attention International Customers:
For those “overseas enthusiasts” who are having trouble getting parts for your electrolyzer project from suppliers in the United States, we are now fortunate to have new supplier in England who can fill your orders!  Please welcome Richard Lines and his enterprise as a supplier for electrolyzer (and other) equipment.  Click here to visit Richard’s website and you will see all he has to offer  ( Sorry, but the 101 plate box - tank will still have to be ordered from Holdgate Enterprises, USA. )

PRIOR CUSTOMERS:  Tongue-and-groove retrofits for the prior generation boxes are available, but it requires complete replacement of the old UHMW glued inner box with a new insert.   See the Price List in Acrobat PDF  for details.   Customers will have to drill their own access holes but instructions and/or fixtures will be included to make this upgrade easier. 


Our high production volumes help keep your costs low!
Shows Sept 2008 Version without included tank top

All parts can be removed for easy replacement.
Shows Sept 2008 Version without included tank top

Gas pickup tube port routes gas to the bubblers (not included)
and then on to the end-use (engine, or whatever in your design.)
Two bubblers per tank are recommended.

Over 100 separate parts are packaged into the tank.

  • Very efficient hydrogen generation

  • Use units in parallel to match hydrogen generation with need

  • Electrolyzer metal plates (101) are not included

  • Even flow water feed manifold

  • Double o-ring electronics penetrators for connections

  • Shipped in just 2 weeks ARO

Contact Holdgate Enterprises to discuss your application, possible custom modifications to suit, and large
quantity discounts that will save you money!   

 

Write Holdgate Enterprises to discuss sketches or prints for building your own custom box (not recommended.)

Click  Frequently  Asked  Questions  for details!

 

Visa & Master Charge Accepted

 

Check out the GROUNDSKEEPER
One free with every order over $200

See the

Master  Price  List   ( Acrobat PDF )

for  all  price  details  on  complete  tanks
and  individual  parts  and  accessories.

Florida residents:

Add 7% tax

DISCLAIMER:

Reasonable care has been employed in the design and construction of all items and information provided.   However, due to conditions beyond our control, failure of the same is always possible due to unforeseen situations and events.   HOLDGATE ENTERPRISES, INC. SHALL NOT BE HELD RESPONSIBLE FOR ANY DEFECTS IN THE MATERIALS, CONSTRUCTION OR DESIGN OF ANY AND ALL ITEMS PURCHASED OR OBTAINED FROM US.    ALL USE IS AT YOUR OWN RISK.

DUE TO THE UNCONTROLLABLE NATURE OF THIS DEVICE, ALL RESPONSIBILITY FOR ITS SAFE OPERATION IS YOUR RESPONSIBILITY.

For whatever purpose you elect to use the box, items, information and/or documents, you do so wholly on your own and no other person and/or company, including but not limited to Holdgate Enterprises Inc, is in any way liable for any loss or damage, any bodily injury or death to you or to others, whether direct or indirect, resulting from your or anyone’s actions and/or use of items obtained from us.  

Reasonable care has been employed in the design and construction of all items and information provided; however due to conditions beyond our control, failure of the same is always possible due to unforeseen situations and events. WE WILL NOT BE HELD RESPONSIBLE FOR ANY DEFECTS IN THE MATERIALS, CONSTRUCTION OR DESIGN OF ANY AND ALL ITEMS PURCHASED OR OBTAINED FROM US.   ALL USE IS AT YOUR OWN RISK.

LIABILITY DISCLAIMER:  Any and all liability shall be limited to repair or replacement of purchased items (less shipping) for up to 1 year.   Items documented to be defective in materials or workmanship (as judged solely by Holdgate Enterprises, Inc.) will be repaired or replaced for up to 1 year.  In case of such claim, write to eholdgate@tampabay.rr.com with your concerns first, and ONLY return items when you have obtained from us a RETURN MATERIAL AUTHORIZATION (RMA) NUMBER.   Under no circumstances are installation charges, removal charges, shipping charges, insurance charges, or any kind of liability or responsibility included in any prices quoted on this website or under RMA.   Use these inventions and/or products at your own risk.  

"WUNDER DRAWERS"  AND / OR  "DROPPING DRAWERS"  ARE PATENTED UNDER # 7140703
.
Additional patents for Holdgate Enterprise, Inc. inventions and innovations are pending.

ALL INFORMATION ON THIS WEBSITE IS COPYRIGHT © 2013 HOLDGATE ENTERPRISES.

Send mail to Ed Holdgate  with questions or comments.
31 Bohenia Circle, Clearwater Beach, FL 33767   (727) 447-8387